Replacing The Cleaning Liquid - Panasonic ES-LV9A Operating Instructions Manual

Replacing the cleaning liquid

If the CHECK lamp glows for 5 seconds when the SELECT
button is pressed, the cleaning liquid needs to be replaced.
• Even if the CHECK lamp does not light up, replace the
cleaning liquid after 6 months have passed.
1
Remove the AC adaptor and
remove the cleaning liquid unit.
(See page 36.)
2
Wash away the old cleaning
liquid.
• It can be drained as sewage.
3
Rinse the cleaning liquid unit.
• Pour water as illustrated while
tilting the cleaning liquid unit and
shaking it gently.
• You can clean with the cleaning
liquid filter removed.
After washing, be sure to attach
the cleaning liquid filter.
4
Gently wipe off any beard
trimmings attached to the inside of
the cleaning tray (a) with a cloth or
tissue paper dampened with water.
• Clean the corners and uneven
parts of the cleaning tray with a
cotton swab dampened with water.
5
Prepare the new cleaning liquid.
(See page 36.)
ES-LV9A_CH.indb 43
Notes
• The cleaning liquid will decrease every time it is used,
but do not add detergent and water except when
replacing the cleaning liquid.
Doing so may deteriorate the cleaning function.
• Do not wash the self‑cleaning recharger unit with water.
• Do not wipe with thinners, benzine, alcohol etc.
Doing so may cause malfunction, or cracking or
discoloration of the parts.
Wipe with diluted soapy water.
• Some cleaning liquid components and skin oil may
1
separate and adhere to the cleaning liquid unit and
cleaning liquid filter. This does not indicate a problem.
►When the water does not drain from the
cleaning tray
• Do not tilt the self‑cleaning recharger to pour out
water. Doing so may cause the cleaning liquid in the
cleaning liquid unit to spill or cause the self‑cleaning
recharger to malfunction.
• Beard trimmings may clog the drain at
the bottom of the cleaning tray.
In this case, you cannot clean or dry the
shaver.
1. Be sure to remove the AC adaptor

from the self‑cleaning recharger.
2. Place the self‑cleaning recharger on a
flat surface, and push the beard
trimmings down through the drain (b)
with a toothpick etc.

43
2016/03/11 9:54:05