Panasonic ES-LV9A Operating Instructions Manual page 38

Notes
• The appliance may not operate in an ambient
temperature lower than approximately 5 °C.
• Depending on the beard thickness or the amount of
beard trimmings in the shaver head, the shaving
sensor may not react and the driving sound may not
change. This is not abnormal.
• To prevent erroneous operation, place your fi ngers on
the fi nger rest while using the shaver.
• The sonic vibration cleaning mode is activated when the
power switch is pressed for more than 2 seconds while
the shaver is not operating (the switch lock is unlocked).
(See page 40.)
You cannot shave in this mode.
Locking/unlocking the power switch
Locking the power switch
1. Press once 2. Press
and then
release.
• The shaver
starts
operating.
38
ES-LV9A_CH.indb 38
for more 3. Release
than 2 seconds.
• The switch lock
lamp ( ) will light
up for 5 seconds
and turn off.
• The shaver will
stop operating.
Unlocking the power switch
1. Press for more than
2 seconds.
• The switch lock lamp
( ) will turn off.
►Cord shaving
If you insert the appliance plug to the shaver and plug
the adaptor into a household outlet, you can use it even
if the battery capacity is low.
• If the shaver does not work, continue charging it for
approx. 1 minute.
• The battery will be discharged even when using the
shaver with the AC adaptor.
►Switching the shaver head
.
You can change the pivot action.
FREE
The shaver head is moved to
prevent missed spots.
LOCK
You can lock the shaver head.
2. Once the shaver starts
operating, release .
FREE
2016/03/11 9:54:01