Panasonic ES-LV9A Operating Instructions Manual page 49

Problem
The shaving sensor
responds even though
the shaver is not in
contact with the skin.
Operating time is short
even after charging.
Shaver does not
operate even after
charging.
ES-LV9A_CH.indb 49
Action
Clean the beard trimmings
from the shaver.
When the shaver is extremely
dirty, remove the foil frame
and wash with water.
(See page 40.)
Replace the system outer
foil and/or inner blades.
Expected life of system
outer foil and inner blades:
System outer foil:
Approximately 1 year
Inner blades:
Approximately 2 years
Apply oil.
When the number of
operations per charge starts
to decrease, the battery is
nearing the end of its life.
Use the appliance in an
ambient temperature
approximately 5 °C or higher.
The battery has reached the
end of its life. In this case, the
shaver will not operate when
the power is turned on with
the AC adaptor connected.
Problem
The shaving sensor is
The driving sound operating. The sound
changes while shaving. changes depending on the
beard thickness.
Apply oil.
The blades will not move
smoothly when there is no
oil on the blades, requiring
more power.
The shaver makes a high‑
pitched sound due to the
Makes a loud sound.
linear motor drive. This does
not indicate a problem.
Confirm that the blades are
properly attached.
Clean the system outer foil
with the brush.
This can be improved by
The odor is getting
cleaning every time after
stronger.
shaving.
This can be improved by
cleaning every time after
Shavings fly out in all shaving.
directions. Clean the inner blades with
the brush when shavings are
adhering to the inner blades.
Action
49
2016/03/11 9:54:05