Table of Contents
Advertisement
Charging without the self‑cleaning recharger
• Wipe off any water droplets on the appliance socket.
1
Insert the appliance plug into
the shaver.
2
Plug the adaptor into a
household outlet.
3
Disconnect the adaptor after
charging is completed.
Preparing the cleaning liquid
Cleaning can start right after the usage by preparing in
advance.
(See page 39.)
• Remove the AC adaptor from the self‑cleaning recharger.
1
Press the cleaning
liquid unit removal
button (1) and
remove the cleaning
liquid unit (2) on a
hard, fl at surface.
• When the self‑cleaning recharger is lifted, or on
the soft surface such as carpets, the lock release
lever will not fi t in the recharger properly. In that
case, the cleaning liquid unit cannot be removed.
36
ES-LV9A_CH.indb
36
2
1
2
Pour tap water (1) and
detergent (2) into the
cleaning liquid unit.
• Be careful not to let the
water rise above the
maximum water line (a).
• Pour the entire packet of
detergent.
3
Slowly insert the
cleaning liquid unit
into the self‑cleaning
recharger until it clicks.
Notes
• To replace the cleaning liquid, see page 43.
• Only use self‑cleaning recharger detergent for
Panasonic shavers.
Not doing so may cause malfunction or failure.
• Do not tilt the self‑cleaning recharger.
Doing so may cause spill or the number of days that
cleaning liquid can be used reduce.
• You can use the cleaning liquid for approximately
30 days if used once per day.
(This will differ depending on beard thickness and the
ambient temperature.)
2016/03/11
9:53:59
Advertisement
Chapters
Table of Contents
