Panasonic ES-LV9A Operating Instructions Manual page 48

Problem
Makes a loud sound.
►Shaver
Problem
The power switch
does not turn ON.
The clean lamp ( )
glows.
(It turns off in about
1 minute.)
48
ES-LV9A_CH.indb 48
Action
During cleaning:
The self‑cleaning
recharger makes a loud
sound due to the cleaning
of the blades.
After cleaning:
The self‑cleaning
recharger makes a loud
sound due to the removal
of water droplets in order
to speed drying.
The sound after cleaning is
different from the sound
during cleaning. The water
level has dropped and it is
removing water droplets from
the blades after cleaning. This
does not indicate a problem.
Action
Unlock the switch lock.
(See page 38.)
Please clean the blades
with the self‑cleaning
recharger or the sonic
vibration cleaning mode.
Problem
Depending on the beard
thickness or the amount of
beard trimmings in the
shaver head, the shaving
sensor may not react and the
driving sound may not
change. This is not abnormal.
The shaving sensor
The shaving sensor may not
does not respond.
respond when the remaining
battery capacity is low. If this
happens, recharge the shaver.
Apply oil. (See page 41.)
The shaving sensor may not
respond when there is not
enough oil on the blades.
Action
2016/03/11 9:54:05