Table of Contents
Advertisement
Troubleshooting
Perform the following actions.
If the problems still cannot be solved or all self‑
cleaning recharger's lamps blink, contact the store
where you purchased the unit or a service center
authorized by Panasonic for repair.
►Self‑cleaning recharger
Problem
The blade has not
been thoroughly
washed.
46
ES-LV9A_CH.indb
46
Action
If the shaver is not cleaned
for more than 2 weeks, first
clean with the cleaning brush
to remove beard trimmings.
(See page 42.)
Do not add detergent and
water except when replacing
the cleaning liquid.
Doing so may deteriorate
the cleaning function.
(See page 43.)
After cleaning, oil‑like droplets
may remain on the outside of
the foil frame. This is the
lubricating component of the
cleaning liquid and does not
indicate a problem. You may
wipe it off with a soft cloth.
Problem
The blades may not dry
quickly due to temperature
The blades are not
conditions.
dry or are sticky.
Run the "Dry/Charge" mode
again or wipe with a soft
cloth before shaving.
Do not insert any foreign
objects into the recharger.
The blades crack or
Replace the system outer
deform during cleaning.
foil and/or inner blades.
(See page 42.)
If you mix soapy water or
hand soap with the detergent
or use another detergent, the
cleaning liquid will foam. Use
The cleaning liquid
the self‑cleaning recharger
has foamed.
after thoroughly washing and
drying the shaver.
Replace the cleaning liquid.
(See page 43.)
Action
2016/03/11
9:54:05
Advertisement
Chapters
Table of Contents
