Table of Contents
Advertisement
DolphinGB-Copy-F_V4_FM.book Page 37 Monday, June 11, 2001 5:02 PM
Job Preset
If a long copy job is in progress and
you do not wish to wait for it to finish,
you can use this function to set up the
next copy job in advance. When the
current copy job is finished, your
copy job will be started automatically.
Limitation
❒ Job preset is one job for one origi-
nal.
❒ The number of jobs that can bis-
tered for Job Preset and each paper
size is as follows:
Standard
A0(E) —
A1(D) 1 job
A2(C) 3 jobs
A3(B) 7 jobs
A4(A) 15 jobs
*1
Depending on the function set-
tings, you may be able to store
more originals.
❒ You cannot use the following func-
tions with Job Preset. Make the set-
tings when the current copy job
has finished.
• Recalling a Program
• Interrupt Copy
• Copying From The Bypass Tray
• Sort
• Image Overlay
• Double Erase
• Image Repeat
• Preset Stamp
• User Stamp
• User Stamp Repeat
• Sample Copy
• Partial Copy
❒ You cannot preset a job while a job
is being sorted.
❒ The maximum number of jobs that
can be preset is 99.
❒ Depending on the size of original,
you may not be able to preset more
jobs even if have not reached the
maximum.
❒ You can select the paper for Job
Preset, but if the paper for the pre-
vious job was set to Plain, Film, or
the Fusing mode setting for Trans-
lucent paper was set to 1 or 2, the
Optional HDD
fusing mode setting will not be
installed
used. In these cases, make the cop-
ies after Job Preset has finished.
*1
49 jobs
See "Fusing Adjustment: Paper
99 jobs
Tray" in the System Settings manu-
99 jobs
als.
A
99 jobs
Press the [Job] key while the mes-
99 jobs
sage "Copying..." is displayed.
❒ You can specify the number of
❒ If the number of jobs is full, you
Note
originals or jobs that can be
scanned for Job Preset.
cannot preset any more jobs
even if memory is still available.
For details about the memory
display, see p.128 "Memory Sta-
tus Display".
Job Preset
2
37
Advertisement
Table of Contents
