Table of Contents
Advertisement
DolphinGB-Copy-F_V4_FM.book Page 64 Monday, June 11, 2001 5:02 PM
Copying
Size Magnification
You can calculate a ratio from the
lengths of the original and copy for
enlarging or reducing the copy.
2
Preparation
Measure and specify the lengths of
the original and copy by compar-
ing "A" with "a".
The enlargement or reduction ratio
is automatically calculated, elimi-
nating the need to calculate the ra-
tio yourself.
Limitation
❒ The ratio is selected from within
the range of 25.0% – 400.0%.
❒ If the calculated ratio is less than
25%, the ratio is set to 25.0%, if it is
more than 400%, it is set to 400.0%.
❒ You cannot use Size Magnification
if Auto Paper Select is selected.
A
Press the [Reduce/Enlarge] key.
64
B
Press the [Size Magnification] key
C
Enter the length of the original
with the number keys, and then
ZEDG070E
press the [#] key.
Note
❒ To change the value, press the
[Clear] key, and then enter the
new value.
D
Press the [Copy___mm (inch)] key
on the screen, and then enter the
copy length with the number
keys. Then press the [#] key.
Note
❒ To change the value, press the
[Clear] key, and then enter the
new value.
E
Press the [OK] key.
Advertisement
Table of Contents
