Table of Contents
Advertisement
DolphinGB-Copy-F_V4_FM.book Page 6 Monday, June 11, 2001 5:02 PM
Operation Panel
1
2 3
1.
Screen contrast knob
Adjusts the brightness of the screen.
2.
Indicators
These indicators show errors or the status
of the machine. See p.103 "Troubleshoot-
ing"
{User Tools/Counter} key
3.
Press this key to change the default set-
tings and operation conditions to match
your requirements. Also displays the to-
tal number of copies made. See p.123
"User Tools (Copier Features)"
4.
Screen
Shows operation status, error messages,
and function menus. See p.8 "Panel
Screen"
{Program} key
5.
Press to select the program mode. See
p.53 "Program"
{Clear Modes/Energy Saver} key
6.
Clears the contents of a setting. Also, if
pressed for more than one second, the
machine is switched to Energy Saver
mode. See p.56 "Energy Saver Mode"
{Interrupt} key
7.
Press to make interrupt copies during a
copy run. See p.39 "Interrupt Copy"
6
4
5
6
9
{Sample Copy/Partial Copy} key
8.
Allows you to make a Sample Copy (us-
ing the current settings) or Partial Copy
(copies a specified part of an original) to
check the settings before making full cop-
ies. See p.57 "Sample Copy", p.58 "Par-
tial Copy"
9.
Number keys
Use to enter the desired number of copies
and data for selected modes. Use the En-
ter key to enter data in selected modes.
Press the {#} key to confirm the values
you have entered.
Press the {.} key to enter a decimal point.
{Clear/Stop} key
10.
Use this key to clear numbers you have
entered, or to interrupt or cancel a copy
job.
{Start} key
11.
Press to start copying. The default setting
is for the originals to be scanned first, and
then copied. You can also use this key to
resume an interrupted copy job (Restart
Copy) or repeat a copy job (Repeat
Copy). See p.128 "Print Start Trigger"
7
8
10 11
12 13
14
ZEDH360E
Advertisement
Table of Contents
