Table of Contents
Advertisement
DolphinGB-Copy-F_V4_FM.book Page 66 Monday, June 11, 2001 5:02 PM
Copying
E
Enter the horizontal or vertical ra-
tio with the number keys, and
then press the [#] key.
Note
❒ Use the {·} key to enter a deci-
mal point.
2
❒ To change the value, press the
[Clear] key, and then enter the
new value.
Using [-1%][+1%][-0.1][+0.1] key
A Press the [+– keys] key.
Note
❒ If a ratio has not been entered
with either the [Horizontal] or
[Vertical] keys, even if you
press the [+- keys], [-1%][+1%]
[-0.1][+0.1] keys the value is
not displayed.
66
B Press the [-1%][+1%] or [-0.1][+0.1]
keys to set the vertical ratio.
C Press the [Vertical] key.
D Press the [-1%][+1%] or [-0.1][+0.1]
keys to set the vertical resolu-
tion.
F
Press the [OK] key.
Advertisement
Table of Contents
