Table of Contents
Advertisement
DolphinGB-Copy-F_V4_FM.book Page 62 Monday, June 11, 2001 5:02 PM
Copying
Fine Magnification
Paper can expand or shrink be affect-
ed, which can result in copies where
size of the original and the copy do
not match (such as under humid con-
dition). This function uses the meas-
2
urements of the original and the copy
to calculate a ratio to produce copies
that are close to actual size.
Note
❒ Fine Magnification is used for orig-
in a ls t h a t ha ve a lre ad y b e en
scanned. If you want to perform
fine magnification corrections to
paper that has stretched due to the
type of paper or exposure to hu-
mid conditions, see "Fine Magnifi-
cation: Copier" in the System
Settings manual.
❒ Set the correction ratio after meas-
uring the length and width of the
original and the copy.
Calculating the Correction Value (%)
Example)
Original
Horiz.
To copy at the same size as the original
... For the example above:
Set the correction value (horizontal) to 0.8%.
❒ When Fine Magnification is select-
ed, depending on the pattern of
original, moire patterns may be
noticeable or the image quality
may deteriorate.
62
A
B
C
Copy
Horiz.
correction value(%)
ZEDG010E
Press the [Reduce/Enlarge] key.
Press the [Fine Mag.] key.
Select the paper type you want to
correct, then adjust the horizontal
and vertical ratio using the [-] and
[+] keys.
Note
❒ If you make a mistake, press the
[Cancel] key, and then repeat the
procedure again.B
Advertisement
Table of Contents
