Summary of Contents for Ballard Designs Nina MS080
Page 1
Customer Service: 800-367-2810 Online: www.ballarddesigns.com PRODUCT NAME: Nina Apothecary Cabinet ITEM NUMBER: MS080 DIMENSIONS OF ITEM ASSEMBLED: 40” H x 38.5” W x 12” D PRODUCTS ARE NOT INTENDED MADE IN CHINA FOR COMMERCIAL USE. UPDATED: 10/8/18 Page 1 of 4...
Page 2
NOTE: Assemble Cabinet in desired location for use. Hardware Located Here Shelf (D) NOTE: When unpacking, lay the parts on a padded surface TOOLS NEEDED: such as the packaging provided. Be sure to locate all -Two person assembly suggested. hardware before throwing away any packaging. -Requires a screwdriver.
Page 3
NOTE: Assemble Cabinet in desired location for use. STEP 1: If the floor is uneven, adjust the levelers located on the underside of the Legs. To do this, lift up the side that needs to be elevated to provide access tp the levelers. Turn the leveler clockwise or counterclockwise until the Cabinet makes adequate contact with the floor.
Page 4
NOTE: Assemble Cabinet in desired location for use. ANTI TIP INSTALLATION: PART B Ltr. Qty. Hardware Included Small Screws Large Screws Brackets Retention Belts Attach 2 Brackets (G) to the back of the Cabinet (C) with the Small Screws (E) through the smaller holes.