Page 1
Customer Service: 800-367-2810 Online: www.ballarddesigns.com PRODUCT NAME: Roland Wall Console ITEM NUMBER: MS124 ASSEMBLED DIMENSIONS : 34.75”H x 36.5”W x 6.25”D Prevent accidentally discarding small parts or hardware. Retain all carton contents until assembly and installation are complete. PRODUCTS ARE NOT INTENDED MADE IN INDIA FOR COMMERCIAL USE.
Page 2
Assemble in location for intended use. REQUIRED TOOLS: Ltr. Qty. Hardware Included -Two person assembly suggested. Retention Belts Remove all parts, hardware and protective packaging from carton Wood Screws and carefully arrange on a clean, level, padded surface. WARNING Wall Brackets Tip-Over Hazard Prevent tipping accidents.
Page 3
Assemble in location for intended use. STEP 1: Set Base (D) upright then carefully place Marble Top (E) into top of Frame. WARNING: To prevent a dangerous tip-over accident, Console must be secured to wall using Brackets as illustrated in this step. STEP 2: Console is best suppported when anchored to a Wall Stud.