Related Manuals for Ballard Designs Dover Shiplap MS106
Summary of Contents for Ballard Designs Dover Shiplap MS106
- Page 1 Customer Service: 800-367-2810 Online: www.ballarddesigns.com PRODUCT NAME: Dover Shiplap Console ITEM NUMBER: MS106 ASSEMBLED DIMENSIONS : 38”H x 73 3/4”W x 15 1/2”D PRODUCTS ARE NOT INTENDED MADE IN CHINA FOR COMMERCIAL USE. UPDATED: 4-30-2020 Page 1 of 5...
-
Page 2: Required Tools
Assemble in location for intended use. Doors (E) Hardware Packet REQUIRED TOOLS: Middle Leg (F) -Phillips Screwdriver Shelves (D) -Two person assembly suggested. Remove all parts, hardware and protective packaging from carton and carefully arrange on a clean, level, padded surface. NOTE: To avoid accidentally discarding small parts or hardware,... - Page 3 Assemble in location for intended use. STEP 1: NOTE: To protect finish, consider leaving packaging in place for this step. Invert Console (C) onto a clean, level surface then insert, turn and hand-tighten Middle Leg (F) into embedded T-nut in center base of Console.
-
Page 4: Cleaning And Care
Assemble in location for intended use. STEP 3: Align and place wheels on bottom of two Doors (E) into REAR TRACK in base of Console (C) then gently push top of each Door into Console. NOTE: Be certain track guides on the top of each door are pushed in and locked before pushing door in. -
Page 5: Installation
WALL ANCHORING HARDWARE (ANTI-TIP) Ltr. Qty. Hardware Included Large Screw Small Screw WARNING Tip-Over Hazard Bracket Serious or fatal crushing injuries can occur from a furniture tip-over Prevent tipping accidents. Anchor your furniture. Retention Belt Installation: 1. Place furniture against wall at desired location then locate and mark a Wall Stud behind unit. 2.
Need help?
Do you have a question about the Dover Shiplap MS106 and is the answer not in the manual?
Questions and answers