Configuring the Network Interface Board
The network interface board settings can be displayed using the commands be-
low.
• telnet : Use the show command. See p.73 "Network interface board configu-
ration settings information".
Item name
Common
Mode
Protocol Up/Down
AppleTalk
TCP/IP
NetWare
SMB
*1
IP over 1394
*1
SCSI print
Ethernet interface
Syslog priority
NVRAM version
Device name
Comment
Location
Contact
Soft switch
AppleTalk
Mode
Net
Object
Type
Zone
Meaning
"Up" means active, "Down" means inactive.
Internal version number.
Internal version number.
AppleTalk protocol in selection.
Network number.
Macintosh printer name.
The type of printer.
Name of the zone that the printer belongs to.
Understanding Displayed Information
9
95