Table of Contents
Advertisement
Using the Printer Function
Printing with NetWare
This chapter describes how to config-
ure the machine for use as a print
server or a remote printer in a Net-
Ware environment.
NetWare Basic Procedure
Install the NIB Setup Tool
Print Server
Configure the Network Interface Board
5
Restart the printer
This section assumes NetWare is
functional and the necessary environ-
ment for the NetWare Print Service is
available.
Note
❒ NetWare must be set to active us-
ing the machine's control panel.
For more information about how
to set it, see General Settings Guide.
40
Remote Printer
Configure the NetWare
Start the print server
❖ ❖ ❖ ❖ SmartNetMonitor for Admin
Using a printer in a NetWare envi-
ronment, configure the NetWare
printing environment by using
SmartNetMonitor for Admin.
Note
❒ If you configure NetWare print-
ing using SmartNetMonitor for
Admin under the following en-
vironments, NetWare Client
provided by Novell is required:
• NDS mode in Windows 95
/98/Me
• NDS or Bindery mode in
Windows 2000/Windows
NT 4.0
❖ ❖ ❖ ❖ Printers listed by SmartNetMonitor for
Admin
SmartNetMonitor for Admin dis-
plays a list of printers, which are
connected to the network.
If you cannot find out the printer
from the displayed list, refer to the
configuration page printed from
the printer. For more information
about printing a configuration
page, see General Settings Guide.
Advertisement
Table of Contents
