Setting Up A Client Computer - Gestetner 3532 Network Manual

Using the Printer Function
O O O O
Assign the printer to the created
print server as follows:
A Click [Assignments], and then
click [Add] in the [Assignments]
group.
B In the [Available objects] box,
click the queue created in step
K K K K
, and then click [OK].
C In the [Printers] group, click the
printer assigned in step B B B B , and
then click [Printer Number].
D Enter the printer number and
click [OK].
Important
❒ Specify the same printer No.
5
as used with NIB Setup Tool.
(Step
E After checking the settings,
click [OK].
P P P P
Start the print server by entering
the following from the console of
the NetWare Server.
If it is running, restart after exiting.
❖ ❖ ❖ ❖ To exit
CAREE: unload pserver
❖ ❖ ❖ ❖ To start
C A R E E : l o a d p s e r v e r
print_server_name
48
H
-E).

Setting Up a Client Computer

This section describes how to set up a
client computer when using a Net-
Ware print server.
Note
❒ Use the version of Novell Client
provided with your operating sys-
tem, or the latest version.
❒ This section assumes that the client
has NetWare client applications in-
stalled and is correctly configured
to communicate with a NetWare
print server. If not, install the nec-
essary applications before starting
the setting up procedure.
Windows 95/98/Me
Follow the procedure to set up a Win-
dows 95/98/Me client:
Preparation
Log on to the NetWare file server
before starting the following pro-
cedure:
A A A A
Install the printer driver you want
to use as "local printer".
Reference
For more information about in-
stalling the printer driver, see
Printer Reference 1.
Note
❒ Any port can be selected during
installation. However, LPT1 is
recommended.
B B B B
Click the [Start]button, point to
[Settings], and then click [Printers].
C C C C
In the [Printers] window, click the
icon of the printer you want to
use.