Table of Contents
Advertisement
❖ ❖ ❖ ❖ SCSI print (SBP-2)
When you print using the SCSI
Print client function supported by
Windows 2000 or Windows XP,
you must set SCSI Print.
Note
❒ Default: Active
❖ ❖ ❖ ❖ Bidirectional SCSI print
Specifies the printer's response
mode and so forth for a status re-
quest when using the IEEE 1394 in-
terface.
Note
❒ Default: ON
❒ If this is set to "OFF", bidirec-
tional communication functions
will not work.
❖ ❖ ❖ ❖ Host Name
Specify the host name.
❖ ❖ ❖ ❖ Domain Name
Specify the domain name.
Interface Settings/IEEE 802.11b
Preparation
You must install the wireless LAN
board (optional) into the machine.
Note
❒ Be sure to make all settings simul-
taneously.
❖ ❖ ❖ ❖ Communication Mode
Specifies the communication mode
of the Wireless LAN.
Note
❒ Default: 802.11 Ad hoc
❖ ❖ ❖ ❖ SSID Setting
Specifies SSID to distinguish the
access point in the Infrastructure
mode.
User Tools Menu (System Settings)
Note
❒ Default: blank (ASSID)
❒ The characters that can be used
are ASCII 0x20- 0x7e (32 bytes).
❒ If blank is specified in 802.11b
Ad hoc mode or Ad hoc mode,
"ASSID" appears.
❖ ❖ ❖ ❖ Channel
Specifies a channel when you se-
lect 802.11b Ad hoc mode or Ad
hoc mode.
Note
❒ Default: 11
❒ The channel can be set from fol-
lowing channel:
• Metric Version: 1-13
• Inch Version: 1-11
❖ ❖ ❖ ❖ Wireless LAN Signal
Shows the radio wave conditions
of the access point connected in In-
frastructure mode.
Note
❒ Radio wave status is shown
when you press the [Wireless
LAN Signal] key.
❖ ❖ ❖ ❖ WEP (Encryption) Setting
Specifies the encryption of the
Wireless LAN. If this is set to "Ac-
tive", you must enter the WEP key.
Note
❒ Default: Inactive
❖ ❖ ❖ ❖ Transmission Speed
Specifies th e comm unica tion
speed of the Wireless LAN.
Note
❒ Default: Auto
❖ ❖ ❖ ❖ Return to Defaults
You can return the Wireless LAN
settings to the default.
3
23
Advertisement
Table of Contents
