Settings You Can Change With User Tools - Gestetner 3532 Network Manual

Name on the Control Panel
Interface IEEE
802.11b
Settings
File SMTP Server Name
Transfer
*1
When the computer is communicating with the machine using SmartNetMonitor for
Admin by means of IPX/SPX, you can make settings for TCP/IP.
*2
When the computer is communicating with the machine using SmartNetMonitor for
Admin by means of TCP/IP, you can make settings for NetWare (IPX/SPX).
Settings You Can Change with
User Tools
Interface Settings/Network
❖ ❖ ❖ ❖ IP Address
Before using this machine with the
network environment, you must
configure the IP address.
Note
❒ Default: Auto-Obtain (DHCP)
❒ When you select [Specify], enter
the IP address and subnet mask
as "xxx.xxx.xxx.xxx"("x" indi-
cates a number).
❒ If you use the interface for Eth-
ernet and IEEE 1394 (IP over
1394) at the same time, settings
must be made with care.
Communication Mode
SSID Setting
Channel
WEP (En- WEP
cryption)
Encryption
Setting
Transmission Speed
User Tools Menu (System Settings)
Web NetMon-
Browser
❍
❍
❍
❍
❍
-
❍
❒ If you install the IEEE 1394 in-
terface board (optional) and use
the IEEE 1394 interface, you
must set the address of the do-
main, different from the IP ad-
dress of [IEEE 1394]. If you
intend to set the address for the
same domain, set a different
value for the Subnet Mask.
❒ When you select [Specify], be
sure not to set the same IP ad-
dress as one of the other ma-
chines in the network.
❖ ❖ ❖ ❖ Gateway Address
A gateway is a connection or inter-
change point connecting two net-
works. Configure the gateway
address for the router or host com-
puter used as a gateway.
Note
❒ Default: 000.000.000.000
Smart-
telnet
itor for
Admin
❍
-
❍
-
❍
-
❍
-
❍
-
❍
-
❍
-
3
21