Table of Contents
Advertisement
4.3.6
Interrupt Moderation rate
If the Network Connection Properties list contains a property
called Interrupt Moderation Rate, then it is possible to set the
preferred value. When it is changed from Minimal to Medium,
High, and Extreme, the number of interruptions is decreased to
get better performance. Set it to "Extreme."
Click "OK" to save the property.
4.3.7
Calculating and setting Inter-Packet Delay
When connecting several cameras to one network interface card via a switching hub, it is important to optimize
the Inter-Packet Delay of the cameras to avoid congestion in the switch. A sure sign of congestion is the loss of
packets.
Since increasing the inter-packet delay also adds overhead to the data transfer it is important to calculate the
optimal setting in order to make best use of the video bandwidth.
JAI Control Tool has a built in wizard for calculating Inter-Packet Delay. When the Inter-Packet Delay function
is activated, a button appears on the right hand side of the bar. Click the button to open the calculation wizard
window.
28
RM/TM-2030GE Series
Functions & Operations
Advertisement
Table of Contents
