Panasonic PT-MW630 Operating Instructions Manual page 208

r Measure for error and warning
Action
number
1 The operating environment temperature is too high. Use the projector in an appropriate operating environment temperature
2 The operating environment temperature is too low. Use the projector in an appropriate operating environment temperature
3 Battery replacement is required. Consult your dealer.
4 If the display does not clear after switching the main power off and on, consult your dealer.
The light source has failed to turn on. If the light source does not light up after turning the power off and on, consult your
5
dealer.
6 Perform maintenance or replacement of the filter. (x page 199)
*1 For the operating environment temperature of the projector, refer to "Operating environment temperature" (x page 221).
208 - ENGLISH
Chapter 6 Maintenance — [SELF TEST] display
Measure
.
*1
.
*1