Panasonic PT-MW630 Operating Instructions Manual page 221

Noise level
*2
Operating
environment
temperature
Operating
environment
Operating
environment
humidity
Power supply
Operating range
Remote
control
Weight
Dimensions
*1 The lens for PT-MZ670L, PT-MW630L, PT-MZ570L, and PT-MW530L is sold separately.
*2 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118:2012 international standards.
*3 Value is for the supplied standard zoom lens. The value varies depending on the lens.
*4 When the Zoom Lens (Model No.: ET-ELW22) is used, the projected image size is 1.524 m (60") to 10.160 m (400").
*5 Average value. Weight varies for each product.
*6 The projector cannot be used at an altitude of 2 700 m (8 858') or higher above sea level.
The light output may decrease to protect the projector when the operating environment temperature exceeds 36 °C (96.8 °F).
Note
f The model numbers of accessories and optional accessories are subject to change without prior notice.
r Connecting terminal
<RGB 1 IN> terminal
<RGB 2 IN> terminal
<MONITOR OUT> terminal
<HDMI 1 IN> terminal
<HDMI 2 IN> terminal
<VIDEO IN> terminal
<AUDIO IN 1> terminal
<AUDIO IN 2> terminal
<AUDIO IN 3> terminal
<VARIABLE AUDIO OUT>
terminal
<SERIAL IN> terminal
<REMOTE 1 IN> terminal
<REMOTE 2 IN> terminal
<DIGITAL LINK/LAN> terminal
<LAN> terminal
<VIEWER/PAIRING> terminal
<DC OUT> terminal
Chapter 7 Appendix — Specifications
32 dB
26 dB
0 °C (32 °F) to 45 °C (113 °F)
*6
20 % to 80 % (no condensation)
DC 3 V (AAA/R03/LR03 battery x 2)
Within approx. 30 m (98'5") (when operated directly in front of signal receiver)
102 ] (3.6 ozs.) (including batteries)
Width: 48 mm (1-7/8"), Height: 145 mm (5-23/32"), Depth: 27 mm (1-1/16")
1 set, BNC x 5 (RGB/YP P /YC
B R
RGB signal 0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)
SYNC/HD
VD
YP P signal Y: 1.0 V [p-p] including synchronization signal, P
B R
1 set, high-density D-Sub 15 p (female)
RGB signal 0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)
SYNC/HD
VD
YP P signal Y: 1.0 V [p-p] including synchronization signal, P
B R
1 set, high-density D-Sub 15 p (female)
RGB signal 0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)
SYNC/HD
VD
YP P signal Y: 1.0 V [p-p] including synchronization signal, P
B R
Total 2 sets, HDMI 19 p, HDCP compatible, Deep Color compatible
Audio signal Linear PCM (sampling frequency: 48 kHz/44.1 kHz/32 kHz)
1 set, pin jack, 1.0 V [p-p] 75 Ω
Total 2 sets, M3 stereo mini jack, 0.5 V [rms], input impedance 22 kΩ or more
1 set, pin jack x 2 (L-R), 0.5 V [rms], input impedance 22 kΩ or more
1 set, M3 stereo mini jack (monitor output, stereo compatible), 0 V [rms] to 2.0 V [rms] (variable), output
impedance 2.2 kΩ or lower
D-Sub 9 p, 1 set, RS-232C compliant, for computer control
1 set, D-Sub 9 p, for contact control
1 set, M3 stereo mini jack, for remote control (wired)
1 set, RJ-45, for network and DIGITAL LINK connections (HDBaseT
100Base-TX, HDCP compatible, Deep Color compatible
1 set, RJ-45, for network connection, PJLink compatible, 10Base-T/100Base-TX
1 set, USB connector (type A), for Memory Viewer function/pairing function
USB connector (type A) x 1, for power supply (DC 5 V, maximum 2 A)
When [LIGHT POWER] in [ECO MANAGEMENT] is set to [NORMAL]
When [LIGHT POWER] in [ECO MANAGEMENT] is set to [QUIET]
C ) x 1
B R
TTL high impedance, automatic positive/negative
polarity compatible
TTL high impedance, automatic positive/negative
polarity compatible
TTL high impedance, automatic positive/negative
polarity compatible
TTL high impedance, automatic positive/negative
polarity compatible
TTL high impedance, positive/negative polarity
TTL high impedance, positive/negative polarity
P : 0.7 V [p-p] 75 Ω
B R
P : 0.7 V [p-p] 75 Ω
B R
P : 0.7 V [p-p] 75 Ω
B R
compliant), PJLink compatible,
TM
ENGLISH - 221