Panasonic PT-MW630 Operating Instructions Manual page 162

[Projector status] page
Click [Status] → [Projector status].
Display the status of the projector for the following items.
1
2
3
4
5
6
1 [PROJECTOR TYPE]
Displays the type of the projector.
2 [PROJECTOR NAME]
Displays the projector name set for the projector.
3 [MAIN VERSION]
Displays the main version of the firmware of the projector.
4 [POWER]
Displays the status of the power.
5 [SHUTTER]
Displays the status of the shutter function ([ON]: Enabled
(closed), [OFF]: Disabled (open)).
6 [PICTURE MODE]
Displays the setting status of [PICTURE MODE].
7 [SERIAL NUMBER]
Displays the serial number of the projector.
8 [NETWORK VERSION]
Displays the network version of the firmware of the projector.
9 [LIGHT POWER]
Displays the setting status of [LIGHT POWER].
10 [VOLUME]
Display the volume status.
162 - ENGLISH
Chapter 5 Operations — Web control function
11 [REMOTE1 STATUS]
Displays the control status of the <REMOTE 1 IN> terminal.
12 [INPUT]
Displays the status of the selected input.
13 [INTAKE AIR TEMPERATURE]
Displays the status of the intake air temperature of the projector.
14 [EXHAUST AIR TEMPERATURE]
Displays the status of the exhaust air temperature of the
projector.
15 [LIGHT TEMPERATURE1]
Displays the temperature status of light source 1.
16 [LIGHT TEMPERATURE2]
Displays the temperature status of light source 2.
17 [LIGHT]
Displays the lighting status and runtime of the light source.
18 [SELF TEST]
Displays the self-diagnosis information.
19 [PROJECTOR RUNTIME]
Displays the runtime of the projector.
7
8
9
10
11
12
13
14
15
16
17
18
19