Panasonic PT-MW630 Operating Instructions Manual page 172

[Authentication set up] page
Set the authentication items when POP authentication or SMTP authentication is necessary to send an E-mail.
Click [Detailed set up] → [Authentication set up].
1 [Auth]
Select the authentication method specified by your Internet
service provider.
2 [SMTP Auth]
Set when the SMTP authentication is selected.
3 [POP server name]
Enter the POP server name.
Allowed characters:
Alphanumerics (A - Z, a - z, 0 - 9)
Minus sign (-) and period (.)
4 [User name]
Enter the user name for the POP server or the SMTP server.
[ECO management set up] page
Settings related to the ECO management function of the projector can be made.
Click [Detailed set up] → [ECO management set up].
1 [LIGHT POWER]
Displays the [LIGHT POWER] setting.
2 [AMBIENT LIGHT DETECTION]
Enables ([ON])/disables ([OFF]) the ambient light detection
function.
3 [SIGNAL DETECTION]
Enables ([ON])/disables ([OFF]) the signal detection function.
4 [POWER MANAGEMENT]
Displays the [POWER MANAGEMENT] setting.
Note
f For details of each setting item, refer to the [PROJECTOR SETUP] menu of the projector → [ECO MANAGEMENT].
172 - ENGLISH
Chapter 5 Operations — Web control function
1
2
3
4
5
6
7
8
5 [Password]
Enter the password for the POP server or the SMTP server.
6 [SMTP server port]
Enter the port number of the SMTP server.
(Normally 25)
7 [POP server port]
Enter the port number of the POP server.
(Normally 110)
8 [Submit]
Update the settings.
1
2
3
4
5
6
7
8
5 [TIMER]
Select the time until the light source is turned off after the power
management function is operated.
6 [QUIK STARTUP]
Displays the [QUICK STARTUP] setting.
7 [VALID PERIOD]
Select the valid period until the [QUICK STARTUP] function is
disabled after going into the standby mode.
8 [Submit]
Updates the setting.