Playing Back Still Images - Panasonic PT-MW630 Operating Instructions Manual

Table of Contents

Advertisement

Chapter 5 Operations — Projecting with MEMORY VIEWER input

Playing back still images

This section describes the procedure using an operation example on the Memory Viewer screen in thumbnail
view.
Playback on the Memory Viewer screen in list view can be performed with the same procedure except for the file
selection.
PREV
Example of display during automatic playback (still image)
When automatic playback is enabled
This section describes the operation method when the [NETWORK/USB] menu → [MEMORY VIEWER] →
[AUTOPLAY] (x page 147) is set to [ON].
In this case, all the still image files inside a single folder is automatically played back following the setting in the
[NETWORK/USB] menu → [MEMORY VIEWER] (x page 146) → [INTERVAL] and [EFFECT].
1)
Press asqw to select the file to project first from the thumbnail, and press the <ENTER> button.
f Playback starts in the full-screen display.
f Press the <ENTER> button during playback to pause automatic playback. Press it again to resume
playback.
f After playback ends, playback of the next file starts.
f Press w during playback to continue the automatic playback from the next image after skipping the file
currently playing back.
f Press q during playback to continue the automatic playback after returning back to the previous file.
f Press a during playback to rotate the image 90° clockwise while retaining the aspect ratio.
f Press s during playback to rotate the image 90° counterclockwise while retaining the aspect ratio.
2)
Press the <AUTO SETUP/CANCEL> button.
f Automatic playback ends and the Memory Viewer screen (thumbnail view) returns.
When automatic playback is disabled
This section describes the operation method when the [NETWORK/USB] menu → [MEMORY VIEWER] →
[AUTOPLAY] (x page 147) is set to [OFF]. In this case, files to be projected are selected and played back one
by one.
1)
Press asqw to select a file from the thumbnail, and press the <ENTER> button.
f The selected still image is played back in the full-screen display.
f Press w to playback the next file.
f Press q to playback the previous file.
f Press a to rotate the image 90° clockwise while retaining the aspect ratio.
f Press s to rotate the image 90° counterclockwise while retaining the aspect ratio.
2)
Press the <AUTO SETUP/CANCEL> button.
f Full-screen display ends and the Memory Viewer screen in thumbnail view returns.
NEXT
ENTER
PLAY
MENU
MENU
CANCEL
RETURN
Operation guide
ENGLISH - 189

Advertisement

Table of Contents
loading

Table of Contents