[Control Device Password Change] - Panasonic PT-MW630 Operating Instructions Manual

8) Press qw to switch the item.
[ENABLE]
[DISABLE]
f The following items can be selected only when [RGB1/2 BUTTON] is selected in [INPUT SELECT
BUTTON].
[TOGGLE]
[RGB1]
[RGB2]
[DISABLE]
f The following items can be selected only when [NETWORK/USB BUTTON] is selected in [INPUT SELECT
BUTTON].
[TOGGLE]
[MEMORY VIEWER]
[Panasonic APPLICATION]
[MIRRORING]
[DISABLE]
f When [INPUT SELECT BUTTON] is selected in Step 7), pressing the <MENU> button returns to the
[CONTROL PANEL] screen or the [REMOTE CONTROL] screen once the item is switched.
9) Press as to select [APPLY], and press the <ENTER> button.
f The confirmation screen is displayed.
10) Press qw to select [OK], and press the <ENTER> button.
Note
f When a button operation is performed on the the control panel or remote control where [DISABLE] is set, the [CONTROL DEVICE
PASSWORD] screen is displayed.
Enter the control device password.
f The [CONTROL DEVICE PASSWORD] screen will disappear when there is no operation for approx. 10 seconds.
f When the setting has completed, the menu screen will disappear. To operate continuously, press the <MENU> button to display the main
menu.
f Even when you set button operations on the remote control disabled, operations of the <ID SET> and <ID ALL> buttons on the remote
control are kept enabled.

[CONTROL DEVICE PASSWORD CHANGE]

The control device password can be changed.
1) Press as to select [CONTROL DEVICE PASSWORD CHANGE].
2) Press the <ENTER> button.
f The [CONTROL DEVICE PASSWORD CHANGE] screen is displayed.
3) Press asqw to select the text, and press the <ENTER> button to enter the text.
4) Press asqw to select [OK], and press the <ENTER> button.
f To cancel, select [CANCEL].
Attention
f The initial password is "AAAA" as the factory default or when the [PROJECTOR SETUP] menu → [INITIALIZE] → [ALL USER DATA] is
executed.
f Change the password periodically that is hard to guess.
Chapter 4 Settings — [SECURITY] menu
Enables button operations.
Disables button operations.
Switches between [RGB1] and [RGB2] when the button is operated.
Fixes to [RGB1].
Fixes to [RGB2].
Disables button operations.
Switches the items in following order when the button is operated.
[MEMORY VIEWER] → [Panasonic APPLICATION] → [MIRRORING]
Fixes to [MEMORY VIEWER].
Fixes to [Panasonic APPLICATION].
Fixes to [MIRRORING].
Disables button operations.
ENGLISH - 139