Guest/More Ap; More Ap Edit - ZyXEL Communications AX Series User Manual

7.3 Guest/More AP

Use this screen to configure a guest wireless network that allows access to the Internet through the Zyxel
Device. Click Network Setting > Wireless > Guest/More AP. The screen appears as shown. This allows you
to use one access point to provide several BSSs simultaneously. You can then assign varying security
types to different SSIDs. Wireless clients can use different SSIDs to associate with the same access point.
The following table shows the supported wireless networks.
Table 32 Supported Wireless Networks
WIRELESS NETWORKS
Main/1
Guest/3
Figure 77 Network Setting > Wireless > Guest/More AP
The following table describes the labels in this screen.
Table 33 Network Setting > Wireless > Guest/More AP
LABEL
#
Status
SSID
Security
Guest WLAN
Modify

7.4 More AP Edit

Use this screen to create a guest wireless network and configure its security settings.
Note: If upstream or downstream bandwidth is empty, the Zyxel Device sets the value
automatically. Setting a maximum upstream or downstream bandwidth will significantly
decrease wireless performance.
Chapter 7 Wireless
WHERE TO CONFIGURE
Network Setting > Wireless > General screen
Network Setting > Wireless > Guest/More AP screen
DESCRIPTION
This is the index number of each SSID profile.
This shows whether the SSID profile is active (a yellow bulb) or not (a gray bulb).
An SSID profile is the set of parameters relating to one of the Zyxel Device's BSSs. The SSID (Service
Set IDentifier) identifies the Service Set with which a wireless device is associated. You can
configure up to four SSIDs to enable multiple BSSs (Basic Service Sets) on the Zyxel Device.
This field displays the name of the wireless profile on the network. When a wireless client scans for
an AP to associate with, this is the name that is broadcast and seen in the wireless client utility.
This field indicates the security mode of the SSID profile.
This field shows whether the SSID profile is an external or home guest.
Click Modify to change the SSID profile.
AX/DX/EX/PX Series User's Guide
135