Setting The Time That Elapses Before Entering The Sleep Mode - Oki B721 User Manual

Setting the Time that Elapses Before Entering the
●
●
Sleep Mode
Note
● When the printer is in power saving mode, press the <POWER SAVE> button to restore from the mode.
● Make sure that the message "Ready To Print" is displayed in the operator panel. If the message is not displayed, press the
<ON LINE> button.
1
Press the <Fn> key on the operator
panel.
2
Enter "201" using the ten-key pad, then
press the <ENTER> button.
3
Press the scroll button
the time and then press the <ENTER>
button.
4
Press the <ON LINE> button.
or to specify
- 45 -

Setting the Time that Elapses Before Entering the Sleep Mode

Memo
● The power save time can be selected from among the
options shown below.
The factory default setting is 15 minute.
- [1 minute]
- [2 minutes]
- [3 minutes]
- [4 minutes]
- [5 minutes]
- [10 minutes]
- [15 minutes]
- [30 minutes]
- [60 minutes]
2