Table of Contents
Advertisement
7
Insert the right side of the metal plate
(2) into the printer, close it, then secure
it by tightening the screw.
8
Close the access cover (1).
9
Plug the AC cable and removed cables
into your printer, and then turn on the
power switch.
10
Press the scroll button
panel.
2
1
on the operator
- 27 -
11
Check that [Configuration] is selected
then press the <ENTER> button.
12
Press the scroll button
to select [System] then press the
<ENTER> button.
13
Press the scroll button
times to select [HDD] then press the
<ENTER> button.
14
Check that the value of [HDD].
Note
● If [uninstalled] is displayed, turn off your printer
and unplug the AC cable and all the cables, and then
reinstall the hard disk.
15
Press the <ON LINE> button.
About the Options
1
several times
several
Advertisement
Table of Contents
