Table of Contents
Advertisement
8
Check the contents in the confirmation
screen. If there is no problem, select
[Yes], and press <ENTER> button.
Connection successful will be displayed once you
have successfully connected to the wireless LAN.
Then the printer driver and others need to be
installed to the computer. Refer to the User's
manual.
If the connection failed, the [Connection failed]
is displayed in five seconds and then go back and
repeat again from step 1.
„ Configuring manually
1
Check and write down the SSID,
encryption scheme, and cryptography
key.
You can check the SSID, encryption scheme, and
cryptography key in the instruction manual for
the access point of the Wireless LAN.
Note
● It is necessary to set the same SSID, encryption
scheme, and cryptography key for the access point of
the Wireless LAN on the printer.
● The SSID, encryption scheme, and cryptography key
are essential for the Wireless LAN connection. Be
sure to check them.
2
Press the scroll button
[Wireless Setting] and then press the
<ENTER> button.
3
Enter the administrator password,
using the ten-key pad, then press the
<ENTER> button.
The factory default password is "aaaaaa". Press
the <ENTER> button whenever inputting one
character.
4
When the display shown below appears,
read it carefully. Press the <ENTER>
button or wait until the display changes.
- 63 -
Connecting to a Computer
to select
3
Advertisement
Table of Contents
