Oki B721 User Manual page 64

Connecting to a Computer
5
Press the scroll button
[Wireless Network Selection] and
then press the <ENTER> button.
3
6
The product starts to search the wireless
access point.
7
A list of access points found by the
search will be displayed.
Select [Manual Setup] at the bottom of
the list, and press <ENTER> button.
8
Press the scroll button
[SSID] and then press the <ENTER>
button.
to select
to select
- 64 -
9
Enter the SSID checked in step 1, using
the ten-key pad.
Memo
● Symbols such as "_ (underscore)" are entered using
the * key.
Note
● Characters are case sensitive. Enter them correctly.
10
Once you have finished entering the
characters, press the <ENTER> button.
11
Press the scroll button
[Security] and then press the
<ENTER> button.
12
Select the security type checked in step
1.
Memo
● The default is [Disable]
● Depending on the model of access point mixed WPA-
PSK/WPA2-PSK may be supported. In this case,
select the WPA2-PSK.
If WEP is selected, go to
selected:".
If WPA-PSK or WPA2-PSK is selected, go to
"13-(2) When WPA-PSK or WPA2-PSK is
selected:".
Memo
● Security settings (WPA-EAP/WPA2-EAP) using an
authentication server are also supported, but this
can only be set from the Web. For details, refer to
User's Manual (Advanced). Depending on the security
setting selected in step 12, execute the settings from
either (1) or (2) below. If [Disable] is selected,
proceed to step 14. (For security reasons, we do not
recommend setting [Disable].)
to select
"13-(1) When WEP is