Moving or Transporting Your Printer
Moving or Transporting Your Printer
●
●
This section explains how to move or transport your printer.
Moving Your Printer
CAUTION
It may cause injury!
● At least two people are needed to lift the printer
safely because it weighs about 27 Kg.
1
Turn off your printer by pressing the
power switch.
Reference
●
"Turning On/Off the Power" P.28
2
Unplug all the cables.
5
3
Remove any paper from the paper trays.
4
Lift your printer and move it to a new
location.
Transporting Your Printer
CAUTION
● At least two people are needed to lift the printer
safely because it weighs about 27 Kg.
CAUTION
Possible to get burned.
● The fuser unit is extremely hot. Do not touch it.
Note
● The image drum (the green tube) is very delicate. Handle
it carefully.
● Do not expose the image drum to direct sunlight or very
bright interior light (approximately more than 1,500 lux).
Even under the normal interior light, do not leave it for
more than 5 minutes.
1
Turn off your printer by pressing the
power switch.
Reference
●
"Turning On/Off the Power" P.28
2
Unplug all the cables.
3
Remove any paper from the paper trays.
4
Insert your finger into the recess on
the right side of the printer and pull the
front cover open lever (1) to open the
front cover (2) forward.
Note
● Open the front cover gently. If you open it rapidly,
the MP Tray may open.
- 140 -
It may cause injury!
1
2