Paper Output
●
●
Your printer outputs to the facedown or faceup stacker. Paper types that can be output to each stacker
are as follows:
Output
Supported
Stacker
paper type
Facedown
● Plain paper
Output
● Recycled
Stacker
paper
Faceup
● Plain paper
Output
● Recycled
Stacker
paper
● Envelope
● Index card
● Label
Note
● Do not open or close the faceup stacker while printing as
it may result in a paper jam.
Using the Facedown Stacker
Paper is delivered with the print side face down,
stacked in the order printed.
Note
● Check that the faceup stacker (1) on the rear side of the
printer is closed. If the faceup stacker is open, paper is
always output to the faceup stacker.
Memo
● Open the paper supporter (2) so that the printed papers
do not fall down from the top cover.
2
Paper output
capacity
● 500 sheets (when
paper weight is less
2
than 80 g/m
)
● 100 sheets (when
paper weight is less
2
than 80 g/m
)
● 20 sheets (Ultra
Heavy paper and
envelopes)
1
- 37 -
Using the Faceup Stacker
Paper is delivered with the print side face up,
stacked opposite the order printed.
1
Pull the faceup stacker (1) on the rear
side of the printer and open it outward.
Insert your finger into the recess at the
center of the faceup stacker then open it
obliquely downward.
2
Unfold the paper support (2).
3
Pull out the sub support (3).
Paper Output
2
1
2
3