●
Setting the Time that Elapses Before Entering the
●
Deep Sleep Mode
Note
● When a printer is in the power saving mode, press the <POWER SAVE> button to restore from the mode.
● Check if the message "Ready To Print" appears. If the message is not displayed, press the <ON LINE> button.
1
Press the <Fn> key on the operator
panel.
2
Enter "201" using the ten-key pad and
then press the <ENTER> button.
3
Press the
or
then press the <ENTER> button.
4
Press the <ON LINE> button.
to specify the time and
Setting the Time that Elapses Before Entering the Deep Sleep Mode
Memo
● The sleep time can be selected from the followings:
- [1 minute]
- [2 minutes]
- [3 minutes]
- [4 minutes]
- [5 minutes]
- [10 minutes]
- [15 minutes]
- [30 minutes]
- [60 minutes]
* Up to 30 minutes for C813/C823.
- 61 -
2