Updating Firmware; Updating The Printer's Firmware Using The Control Panel - Epson SureColor SC-T7700D Administrator's Manual

Administrator's Guide
Items for Email Notification
Items
Ink cartridge(s) to be replaced
Ink low
Maintenance box: end of service life
Maintenance box: nearing end
Administrator password changed
Paper out
Paper Low
Printing stopped*
Printer error
Wi-Fi failure
TPM failure
Print Job Completion *2

Updating Firmware

When new firmware is available, updating the firmware of the printer improves the function or resolves the
problem.

Updating the Printer's Firmware using the Control Panel

If the printer can be connected to the Internet, you can update the printer's firmware using the control panel. You
can also set the printer to regularly check for firmware updates and notify you if any are available.
1. Select Menu on the home screen.
2. Select General Settings > System Administration > Firmware Update > Update.
Note:
Select Notification > On to set the printer to regularly check for available firmware updates.
3. Select Start Checking.
The printer starts searching for available updates.
Operation and Management Settings
Notice when the ink is expended.
Notice when the ink is nearing expended.
Notice when the maintenance box is full.
Notice when the maintenance box is nearing full.
Notice when administrator password has been changed.
Notice when the paper-out error has occurred in the specified paper source.
Notice when the paper-low error has occurred in the specified paper source.
Notice when printing has stopped due to a paper jam or paper size/paper type
mismatch.
Notice when the printer error has occurred.
Notice when the error of the wireless LAN interface has occurred.
Notice when an error in the TPM chip has occurred.
The printer sends an e-mail each time the number of print jobs set in the
pulldown menu is completed.
51
Settings and Explanation