Environment; Mechanical Specifications; Elimination Of Heat - Leadshine Technology DMA860E User Manual

2.2 Environment

Cooling
Operating Environment
Storage Temperature
Weight

2.3 Mechanical Specifications

(unit: mm [1inch=25.4mm])

2.4 Elimination of Heat

DMA860E reliable working temperature should be < 60℃ (140°F)

It is recommended to use automatic idle-current mode to reduce motor heating. That means set the SW4 pin of

DIP switch at "OFF" position.
It is recommended to mount the drive vertically to maximize heat sink area. Use forced cooling method to cool if

necessary.
Environment
Ambient Temperature
Humidity
Operating Temperature
Vibration
4-Ф3.5
Figure 1: Mechanical specifications
Side mounting recommended for better heat dissipation

DMA860E Digital Stepper Drive User Manual
Natural Cooling or Forced cooling
Avoid dust, oil fog and corrosive gases
0°C － 65°C (32°F - 149°F)
40%RH－90%RH
0°C － 50°C (32°F - 122°F)
10-50Hz / 0.15mm
-20°C － 65°C (-4°F - 149°F)
Approx. 510g (1.13 lbs)
151
112
Fan
112
Page | 2