2.2 Environment
Cooling
Operating Environment
Storage Temperature
Weight
2.3 Mechanical Specifications
(unit: mm [1inch=25.4mm])
2.4 Elimination of Heat
DM542E reliable working temperature should be < 60
It is recommended to use automatic idle-current mode to reduce motor heating. That means set the SW4 pin of
DIP switch at "OFF" position.
It is recommended to mount the drive vertically to maximize heat sink area. Use forced cooling method to cool if
necessary.
Environment
Ambient Temperature
Humidity
Operating Temperature
Vibration
Figure 1: Mechanical specifications
* Side mounting recommended for better heat dissipation
DM542E Digital Stepper Drive User Manual
Natural Cooling or Forced cooling
Avoid dust, oil fog and corrosive gases
0°C - 65°C (32°F - 149°F)
0°C - 50°C (32°F - 122°F)
-20°C - 65°C (-4°F - 149°F)
Approx. 227g (8 oz)
(140°F)
40%RH-90%RH
10-50Hz / 0.15mm
Page | 2