Displaying Internal Test Pattern; Using The Status Function - Panasonic PT-RQ35KU Operating Instructions Manual

Chapter 3 Basic Operations — Operating with the remote control

Displaying internal test pattern

The projector has nine types of internal test patterns to check the condition of the projector. To display test
patterns, perform the following steps.
button
1) Press the <TEST PATTERN> button.
2) Press qw to select the test pattern.
Note
f Test patterns can also be displayed using the menu operation. Refer to "[TEST PATTERN] menu" (x page 185) for details.
f Settings of position, size, and other factors will not be reflected in test patterns. Make sure to display the input signal before performing
various adjustments.

Using the status function

Display the status of the projector.
button
1) Press the <STATUS> button.
f The [STATUS] screen is displayed.
Note
f The projector status can also be displayed using the menu operation. Refer to the [PROJECTOR SETUP] menu → [STATUS]
(x page 177) for details.
STATUS
PROJECTOR TYPE
RQ32K(123456789012)
PROJECTOR RUNTIME
100000h
LIGHT RUNTIME
100000h / 100000h
MAIN/SUB VERSION
1.00 / 1.00
INTAKE AIR TEMP.
31°C/87°F
OPTICS MODULE TEMP.
27°C/80°F
EXHAUST AIR TEMP. 31°C/87°F
LIGHT1-B TEMP. 31°C/87°F
LIGHT1-S TEMP. 31°C/87°F
LIGHT2-B TEMP. 31°C/87°F
LIGHT2-S TEMP.
31°C/87°F
SELF TEST NO ERRORS
SEND E-MAIL
ENTER
CHANGE EXIT
MENU
1/6
ENGLISH - 85