Panasonic PT-RQ35KU Operating Instructions Manual page 133

4) Press as to select [SDI1], [SDI2], [SDI3], or [SDI4], and press the <ENTER> button.
f The [SINGLE LINK SETTING] screen for the selected item is displayed.
5) Press as to select [RESOLUTION], and press the <ENTER> button.
f The [RESOLUTION] screen is displayed.
6) Press as to select an item, and press the <ENTER> button.
f Select [AUTO], [720x480i], [720x576i], [1280x720p], [1920x1080i], [1920x1080p], [1920x1080sF], or
[2048x1080p] when [SINGLE LINK SETTING] is selected.
f Select [AUTO], [1920x1080i], [1920x1080p], [1920x1080sF], [2048x1080p], [3840x2160p], or [4096x2160p]
when [DUAL LINK SETTING] is selected.
f Select [AUTO], [3840x2160p], [3840x2160sF], or [4096x2160p] when [QUAD LINK SETTING] is selected.
Setting [4K DIVISION] in [SLOT IN] (SDI input)
Set the transmission method in the 4K division when 4K image is displayed with SDI input.
1) Press as to select [SLOT IN].
2) Press the <ENTER> button.
f The [SLOT IN] screen is displayed.
3) Press as to select [DUAL LINK SETTING] or [QUAD LINK SETTING], and press the <ENTER> button.
f The [DUAL LINK SETTING] screen or the [QUAD LINK SETTING] screen is displayed.
4) Press as to select [4K DIVISION].
5) Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[SQUARE]
[INTERLEAVE]
Setting [3G-SDI MAPPING] in [SLOT IN] (SDI input)
1) Press as to select [SLOT IN].
2) Press the <ENTER> button.
f The [SLOT IN] screen is displayed.
3) Press as to select [SINGLE LINK SETTING], [DUAL LINK SETTING], or [QUAD LINK SETTING], and
press the <ENTER> button.
f The [SINGLE LINK SETTING] screen, the [DUAL LINK SETTING] screen, or the [QUAD LINK SETTING]
screen is displayed.
f Proceed to Step 5) when [DUAL LINK SETTING] or [QUAD LINK SETTING] is selected.
4) Press as to select [SDI1], [SDI2], [SDI3], or [SDI4], and press the <ENTER> button.
f The [SINGLE LINK SETTING] screen for the selected item is displayed.
5) Press as to select [3G-SDI MAPPING].
6) Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[LEVEL A]
[LEVEL B]
Note
f This function does not operate when the SD-SDI signal or the HD-SDI signal is input.
f [3G-SDI MAPPING] cannot be set when [SDI LINK] is set to [AUTO].
Chapter 4 Settings — [DISPLAY OPTION] menu
Automatically select [SQUARE] or [INTERLEAVE].
Fixes the transmission method to Square Division.
Fixes the transmission method to 2-Sample Interleave Division.
Automatically select [LEVEL A] or [LEVEL B].
Fixes the mapping method to 3G-SDI Level-A.
Fixes the mapping method to 3G-SDI Level-B.
ENGLISH - 133