[Backup Input Setting] - Panasonic PT-RQ35KU Operating Instructions Manual

3) Press as to select [SIGNAL LEVEL ADJUST].
4) Press qw to switch the item.
[OFF]
[ON]
Note
f [SIGNAL LEVEL ADJUST] may not function properly unless a still image containing clear blacks and whites is input.

[BACKUP INPUT SETTING]

Set the backup function that switches the signal to the backup input signal as seamless as possible when input
signal is disrupted.
1) Press as to select [BACKUP INPUT SETTING].
2) Press the <ENTER> button.
f The [BACKUP INPUT SETTING] screen is displayed.
3) Press as to select [BACKUP INPUT MODE].
4) Press the <ENTER> button.
f The [BACKUP INPUT MODE] screen is displayed.
5) Press as to select the combination of the input and press the <ENTER> button.
Primary input
[SDI1]
[HDMI1 [SLOT1]]
*1
[HDMI3 [SLOT2]]
*2
[DVI-D1 [SLOT1]]
*1
[DVI-D3 [SLOT2]]
*2
[DisplayPort1 [SLOT1]]
[SDI1 [SLOT1]]
*4
[SDI3 [SLOT2]]
*5
[SDI1 [SLOT1]]
*6
[SDI1 [SLOT2]]
*7
[SDI1-2]
[HDMI1-2 [SLOT1]]
[DVI-D1-2 [SLOT1]]
[SDI1-2 [SLOT1]]
*9
[SDI1-2-3-4]
*9
[SDI1-2-3-4]
*6
[SDI1-2-3-4]
*7
*1 This is displayed when the optional Interface Board equipped with corresponding input is installed in <SLOT 1>.
*2 This is displayed when the optional Interface Board equipped with corresponding input is installed in <SLOT 2>.
*3 This is displayed when the optional Interface Board for DisplayPort 2 input (Model No.: ET-MDNDP10) is installed in <SLOT 1> and
<SLOT 2>.
*4 This is displayed when the optional 3G-SDI Terminal Board with Audio (Model No.: TY-TBN03G) is installed in <SLOT 1>.
*5 This is displayed when the optional 3G-SDI Terminal Board with Audio (Model No.: TY-TBN03G) is installed in <SLOT 2>.
*6 This is displayed when the optional Interface Board for 12G-SDI (Model No.: ET-MDN12G10) is installed in <SLOT 1>.
*7 This is displayed when the optional Interface Board for 12G-SDI (Model No.: ET-MDN12G10) is installed in <SLOT 2>.
*8 This is displayed when the optional Interface Boards equipped with corresponding input are installed in <SLOT 1> and <SLOT 2>.
*9 This is displayed when the optional 3G-SDI Terminal Board with Audio (Model No.: TY-TBN03G) is installed in <SLOT 1> and <SLOT 2>.
6) Press the <MENU> button.
f The [BACKUP INPUT SETTING] screen is displayed.
7) Press as to select [AUTOMATIC SWITCHING].
f When [BACKUP INPUT MODE] is set to [OFF], [AUTOMATIC SWITCHING] cannot be selected.
Chapter 4 Settings — [DISPLAY OPTION] menu
Does not perform automatic adjustment.
Adjusts black level (the [PICTURE] menu → [BRIGHTNESS]) and white level (the [PICTURE] menu
→ [CONTRAST]) when automatic setup is executed.
Secondary input
[OFF]
[SDI2]
[HDMI2 [SLOT1]]
[HDMI4 [SLOT2]]
[DVI-D2 [SLOT1]]
[DVI-D4 [SLOT2]]
[DisplayPort3 [SLOT2]]
*3
[SDI2 [SLOT1]]
[SDI4 [SLOT2]]
[SDI3 [SLOT1]]
[SDI3 [SLOT2]]
[SDI3-4]
[HDMI3-4 [SLOT2]]
*8
[DVI-D3-4 [SLOT2]]
*8
[SDI3-4 [SLOT2]]
[SDI1-2-3-4 [SLOT1/2]]
[SDI1-2-3-4 [SLOT1]]
[SDI1-2-3-4 [SLOT2]]
Number of signals
constructing one
screen
―
*1
*2
*1
*2
1
*3
*4
*5
*6
*7
*8
2
*8
*9
*9
4
*6
*7
Details
Disables the backup function.
Enables the backup function.
ENGLISH - 117