Panasonic PT-RQ35KU Operating Instructions Manual page 52

Chapter 2 Getting Started — Attaching/removing the projection lens (optional)
2) Remove the projection lens by turning it counterclockwise while pressing the lens release button.
(Fig. 1)
f Turn the projection lens counterclockwise until the mark on the projection lens (orange) is aligned with the
mark on the projector (E on the left side of LOCK).
f Proceed to Step 3) when carrying or storing the projector.
3) Attach the supplied lens hole cover. (Fig. 2)
f Insert the lens hole cover by aligning the mark on the lens hole cover (E) with the mark on the projector (E
on the left side of LOCK) and turn clockwise until it clicks.
4) Secure the lens hole cover. (Fig. 3)
f Use a Phillips screwdriver to tighten the screw fixing the lens hole cover.
Note
f Some lenses may not have a screw hole to use to secure the projection lens.
Attention
f Store the removed projection lens where it will be free from vibration and impact.
f Store the removed lens fixing screw in a safe place.
52 - ENGLISH