DeltaStream GPON Optical Line Terminal
Chapter 4 Configuration
The device supports three configuration options:
Via the MGMT Port
■
Via the SFP+/GE Port
■
Via the Console Port
■
Note:
For the detailed configurations, refer to the User Guide of the device. We take DS-P7001-08 as
an example of OLT devices in the following figures.
4.1
Via the MGMT Port
1. Connect the MGMT port of OLT to the management PC using an Ethernet cable.
2. Set the IP address of the PC as 192.168.1.x/24 (x is a number between 2 and 254).
3. You can access the device using the Web UI or the CLI.
Using the Web UI: Open the web browser on the PC. Enter 192.168.1.1 in the address bar to open
■
the web UI of the device. Log in to the web UI. The default username and password are both admin.
The first time you log in, you are required to change the password for security purposes.
Using the CLI: Use a telent or SSH terminal to access 192.168.1.1 to open the CLI of the device. Log
■
in to the CLI. The default username and password are both admin. The first time you log in, you are
required to change the password for security purposes.
4.2
Via the SFP+/GE Port
1. Make sure your PC has network access to the SFP+/GE port of OLT.
PC
14
Configuration
PC
MGMT Port
OLT (DS-P7001-08)
Network
OLT (DS-P7001-08)
SFP+/GE