Table of Contents
Advertisement
TD-W8968
PPP Username/Password: Enter the Username and Password provided by your ISP. These
fields are case-sensitive.
Use Static IPv4 Address: If your ISP specifies an IP address for you, click the checkbox and
fill the Static IPv4 Address.
Use Static DNS IP Address: If your ISP specifies a DNS IP address for you, click the
checkbox and fill the Primary DNS and Secondary DNS blanks below. The Secondary DNS
is optional. Otherwise, the DNS servers will be assigned dynamically from ISP.
Primary DNS: Enter the DNS IP address in dotted-decimal notation provided by your ISP.
Secondary DNS: (Optional) Enter another DNS IP address in dotted-decimal notation
provided by your ISP.
Once the connection is successful, you will find the 3G screen is similar to Figure 4-20. Click menu
"Device Info" "WAN" and you will see the 3G status is similar to Figure 4-25.
Click the Save button to save your settings.
4.5.4 MAC Clone
Choose menu "Advanced Setup" "MAC Clone", you can configure the MAC address of the
WAN Interface as shown below.
The WAN Interface List displays the Lay2 Interfaces you have configured on the section
Layer2 Interface
and its default MAC Address. If you have not configured corresponding WAN
Service for the interface on the section
"Need a corresponding WAN Service".
The last one of WAN Interface List displays your PC's current address.
300Mbps Wireless N USB ADSL2+ Modem Router User Guide
Figure 4-24
Figure 4-25
4.5.2 WAN
31
Service, the blank for MAC Address will display
4.5.1
Advertisement
Table of Contents
