Mac Clone - TP-Link TL-WR845N Manual

Chapter 4
• Confirm Password
password you entered is correct.
• Connect/Disconnect
• Dynamic IP/ Static IP
please enter the IP address, subnet marsk, gateway and DNS also provided by your
ISP.
• Internet IP Address/ Internet DNS
assigned by L2TP server.
• Connection Mode
• Connect on Demand
automatically after a specified inactivity period (Max Idle Time) and be re-
established when you attempt to access the Internet again. If you want to keep
your Internet connection active all the time, please enter 0 in the
field. Otherwise, enter the number of minutes you want to have elapsed before
your Internet access disconnects.
• Connect Automatically
when it is down.
• Connect Manually
immediately. This mode also supports the
on Demand mode. The Internet connection can be disconnected automatically
after a specified inactivity period (Max Idle Time) and not be able to re-establish
when you attempt to access the Internet again.
Note:
Sometimes the connection cannot be terminated although you have specified the
applications are visiting the Internet continually in the background.
4. 3. 2.

MAC Clone

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to Network > MAC
3. Configure the WAN MAC address and click Save.
• WAN MAC Address
If your ISP requires you to register the MAC address, please enter the correct MAC
- Enter the Password provided by your ISP again to ensure the
- Click this button to connect or disconnect immediately.
- Select either as required by your ISP. If
- The Internet IP address and DNS server address
- In this mode, the Internet connection can be terminated
- The connection can be re-established automatically
- You can click
Clone.
- This field displays the current MAC address of the WAN port.
Connect/Disconnect
Max Idle Time
Static IP is selected,
Max Idle Time
to connect/disconnect
function as Connect
Max Idle Time because some
25