Mac Clone; Lan - TP-Link TL-WR841N User Manual

Chapter 4
•
•
Note:
Sometimes the connection cannot be terminated although you have specified the
applications are visiting the Internet continually in the background.
4. 3. 2.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to
3. Configure the WAN MAC address and click Save.
• WAN MAC Address
If your ISP requires you to register the MAC address, please enter the correct MAC
address in this field. Click
port to the factory default value.
• Your PC's MAC Address
the router. If the MAC address is required, you can click
MAC address will be filled in the
Note:
• You can only use the MAC Address Clone function for PCs on the LAN.
• If you have changed the WAN MAC address when the WAN connection is PPPoE, it will not take effect until the
connection is re-established.
4. 3. 3.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to
3. Configure the IP parameters of the LAN and click Save.
Downloaded from ManualsNet.com
Connect Automatically
when it is down.
Connect Manually - You can click
immediately. This mode also supports the
on Demand mode. The Internet connection can be disconnected automatically
after a specified inactivity period (Max Idle Time) and not be able to re-establish
when you attempt to access the Internet again.

MAC Clone

Network > MAC Clone.
- This field displays the current MAC address of the WAN port.
Restore Factory MAC
- This field displays the MAC address of the PC that is managing

LAN

Network > LAN.
search engine
- The connection can be re-established automatically
Connect/Disconnect
Max Idle Time
to restore the MAC address of WAN
WAN MAC Address field.
Configure
to connect/disconnect
function as Connect
Max Idle Time because some
Clone MAC Address and this
26