TP-Link TDW8968V3 User Manual page 18

TD-W8968
RESET: There are two ways to reset the modem router's factory defaults.
1) Use the Restore Default function on Management -> settings -> Restore Default page in
the modem router's Web-based Utility.
2) Use the Factory Default RESET button: With the modem router powered on, use a pin to press
and hold the RESET button for at least 5 seconds. And the modem router will reboot to its
factory default settings.
WPS: The switch for the WPS function. For details, please refer to
ON/OFF: The switch for the power.
POWER: The Power plug is where you will connect the power adapter.
Wireless Antennas: To receive and transmit the wireless data.
300Mbps Wireless N USB ADSL2+ Modem Router User Guide
6
4.6.2.1 WPS Setup.