Before Using The Machine With The Access Point Mode - Canon Pixma MG7150 Online Manual

Before Using the Machine with the Access Point Mode

When you use the machine with the access point mode, be sure to specify the access point name of the
machine and the security setting in advance.
Setting Procedure When Using the Machine with the Access Point Mode
1. Make sure that the machine is turned on.
2. Flick the HOME screen, then tap
Using the Operation Panel
3. Tap Device settings.
4. Tap LAN settings.
5. Tap Other settings.
6. Tap Access point mode settings.
The screen to specify the access point name is displayed.
7. Tap the touch screen.
8. Enter the access point name.
Enter the access point name when you use the machine as an access point.
9. Tap Apply to finish entering the name.
10. Tap OK to finish specifying the access point name.
11. Select the security setting.
Disable
Finishes the access point settings without specifying the security setting.
WPA2-PSK (AES)
Specifies the security setting applying WPA2-PSK (AES). Proceed to the next step when the
screen to specify the passphrase.
12. Tap the touch screen.
13. Enter the passphrase.
14. Tap Apply to finish entering the passphrase.
Setup.
248