Canon Pixma MG7150 Online Manual page 313

If you cannot print
Check the following if you cannot print.
• Check that the printer is connected to the Internet.
• Check that the printer is connected to a LAN and the LAN environment is connected to the Internet.
If your printer has a LCD monitor
• Check that no error message is displayed on the printer's LCD monitor.
• If printing does not start even after you wait awhile, go to the printer home screen and run
Setup (or by pressing the Setup button on the operation panel) -> Web service inquiry. If
printing does not start, run the inquiry several times.
If your printer does not have a LCD monitor
If printing does not start even after you wait awhile, first turn off the printer, and then turn it back on
again.
If the problem is not resolved, use the printer driver from your computer to perform the print job and
check whether the data can be printed normally on the printer.
If you still cannot print, see the troubleshooting page for your model on the Home of the Online Manual.
Note
• With a wireless LAN connection, after the printer is turned on, it may take several minutes before
communication is possible. Check that your printer is connected to the wireless network, and wait a
while before you start printing.
• If the printer is not turned on or is not connected to the Internet, and consequently a print job is not
processed within 24 hours after it was submitted, the print job is automatically canceled. If this
happens, check the printer power and the Internet connection, and then re-submit the print job.
60