Table of Contents
Advertisement
from -50 to 50.
This adjustment changes the relative amount of ink of each color used, which
alters the total color balance of the document. Use your application if you want
to change the total color balance significantly. Use the printer driver only if you
want to adjust the color balance slightly.
Tone
Sets the color adjustment for monochrome printing.
Moving the slider to the right produces warm colors (Warm), and moving the
slider to the left produces cool colors (Cool).
You can also directly enter a value linked to the slider. Enter a value in the range
from -50 to 50.
Important
This function is not available for certain Media Type settings.
Brightness
Selects the brightness of your print.
You cannot change the levels of pure white and black. However, the brightness
of the colors between white and black can be changed.
Intensity
Adjusts the overall intensity of your print.
Moving the slider to the right increases the intensity, and moving the slider to the
left decreases the intensity.
You can also directly enter a value linked to the slider. Enter a value in the range
from -50 to 50.
Contrast
Adjusts the contrast between light and dark in the image to be printed.
Moving the slider to the right increases the contrast, moving the slider to the left
decreases the contrast.
You can also directly enter a value linked to the slider. Enter a value in the range
from -50 to 50.
Important
When Grayscale Printing is checked on the Main tab, Cyan, Magenta, and
Yellow appear grayed out and are unavailable.
Print a pattern for color adjustment
When the color balance or intensity/contrast is changed, the pattern printing
function prints a list of the adjustment results along with the adjustment values.
Select this function when printing a pattern for color adjustment. The Pattern
123
Advertisement
Chapters
Table of Contents
