Canon Pixma MG7150 Online Manual page 211

Placing a Printable Disc
11. Tap OK.
The machine starts printing.
Note
• Touch the Stop button to cancel printing.
• After printing, allow the printing surface of the disc to dry naturally. Do not use hairdryers or expose
the disc to direct sunlight to dry the ink. Do not touch the printing surface until the ink has dried.
• To keep the print quality at an optimal level, it is recommended to stop printing discs once every ten
discs when printing more than ten discs continuously. To stop the printing operation, detach the
disc tray from the machine, then close the inner cover (the cover of the disc tray). After
approximately three minutes have elapsed, open the inner cover, attach the disc tray to the
machine, then resume printing.
• If printing is misaligned, adjust the printing position using Adjust disc print area in Print settings
under Device settings.
Print settings
211